Arduino Uno is a development board based on the ATmega328P microcontroller. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
You can tinker with your UNO without worrying too much about doing something wrong, in worst case scenario you can replace the chip for a few dollars and start over again.
"Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The
Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.
Tech Specs:
Microcontroller
| |
Operating Voltage
|
5V
|
Input Voltage (recommended)
|
7-12V
|
Input Voltage (limit)
|
6-20V
|
Digital I/O Pins
|
14 (of which 6 provide PWM output)
|
PWM Digital I/O Pins
|
6
|
Analog Input Pins
|
6
|
DC Current per I/O Pin
|
20 mA
|
DC Current for 3.3V Pin
|
50 mA
|
Flash Memory
|
32 KB (ATmega328P) of which 0.5 KB used by bootloader
|
SRAM
|
2 KB (ATmega328P)
|
EEPROM
|
1 KB (ATmega328P)
|
Clock Speed
|
16 MHz
|
LED_BUILTIN
|
13
|
Length
|
68.6 mm
|
Width
|
53.4 mm
|
Weight
|
25 g
|
Schematics:
If I see a good post, you will not go without praising me, because every word written in the post you have written is very thoughtful, your way of writing is very beautiful and your views are also very good. This is a commendable post, as much as this post is praised, it is less, you should keep writing more beautiful posts in your life.
ReplyDeleteescort service in Delhi
Call Girls in Gurugram
call girls gurugram
independent call girls in gurugram